Supremo SW woofers employ an aerodynamic die-cast Uniflow chassis to minimize sound reflection distortion and provide shallow mounting capabilities. The 3" EVC Hexatech voice coil, coupled with its unique Hybrid magnet motor structure (combined ferrite and neodymium magnets) produce remarkably high power capability, high efficiency, as well as a wide and natural dynamic range. Supremo SW woofers are available in 5", 6", and 9".
| SPECIFICATIONS |
SUPREMO SW 5"
WOOFER |
SUPREMO SW 6"
WOOFER |
SUPREMO SW 9"
WOOFER |
| Nominal Impedance |
4 Ohm |
4 Ohm |
4 Ohm |
| Power Handling |
120W |
140W |
150W |
| Max. Transient Power Handling |
1000W |
1000W |
1000W |
| Sensitivity (2.83V/1M) |
88dB |
89dB |
91dB |
| Frequency Response |
35-4200Hz |
25-5000Hz |
20-2600Hz |
| FS |
62Hz |
62Hz |
56Hz |
| Voice Coil Diameter |
75mm (3") |
75mm (3") |
75mm (3") |
| Voice Coil Height |
5mm (0.2") |
5mm (0.2") |
5mm (0.2") |
| Voice Coil Type/Former |
Aluminum |
Aluminum |
Aluminum |
| Voice Coil Wire |
Hexatech Aluminum |
Hexatech Aluminum |
Hexatech Aluminum |
| DC Resistance |
3.5 Ohm |
3.5 Ohm |
3.5 Ohm |
| Voice Coil Inductance @1kHz |
0.20MH |
0.22MH |
0.22MH |
| Magnet System |
Linear dynamic Hybrid rear vented |
Linear dynamic Hybrid rear vented |
Suprmeo Hybrid rear vented |
| HE-Magnetic Gap Height |
16mm (0.64") |
16mm (0.64") |
16mm (0.64") |
| B-Flux Density |
0.7T |
0.7T |
0.7T |
| BL Product/BXL |
4.32 |
4.32 |
4.32 |
| Max. Linear Excursion/Xmax |
11mm (±5.5mm) |
11mm (±5.5mm) |
11mm (±5.5mm) |
| Suspension Compliance CMS |
714 |
727 |
425 |
| Mechanical Q Factor QES |
0.61 |
0.75 |
1.20 |
| Total Q Factor Q/T |
0.45 |
0.55 |
0.72 |
| QMS |
1.72 |
2.14 |
2.70 |
| Mechanical Resistance RMS |
1.85kgS¹ |
1.49kgS¹ |
1.49kgS¹ |
| Moving Mass MMS |
7.82gr (0.27oz) |
8.20gr (0.28oz) |
15.20gr (0.53oz) |
| Equivalent Car Air Load VAS |
8.00L (0.28ft³) |
14.35L (0.51ft³) |
32.00L (1.14ft³) |
| Effective Pison Area SD |
90cm² (13.95in²) |
119cm² (18.45in²) |
219cm² (33.95in²) |
| Cone Type |
One-piece formed |
One-piece formed |
One-piece formed |
| Cone Material |
Coated cellular fiber |
Coated cellular fiber |
Coated cellular fiber |
| Unit Diameter |
135mm (5¼") |
165mm (6½") |
222mm (8¾") |
| Mounting Depth |
60mm (2.36") |
61mm (2.40") |
71mm (2.80") |
| Mounting Cutout |
120mm (4.72") |
141mm (5.55") |
192mm (7.56") |
| Net Weight |
1.35kg (3.00lb) |
1.47kg (3.2lb) |
1.60kg (3.55lb) |
