Profiled to allow the Octave Signature Bookshelf to sit on top to create a single visual structure, the Octave Signature Subwoofer takes up no more floor space than a pair of speaker stands.
Technical highlights include Isobaric loading which reduces the cabinet size by half for the same bass extension. A built in passive crossover designed to create a seamless transition from the Octave Signature Subwoofer to the Octave Signature Bookshelf.
The all-new audio drivers deliver enhanced and controlled, accurate bass frequencies with the quality, dynamic impact of the original recording, placing you right at the heart of the action.
The Octave Signature Floor-standing speakers include a pair of Octave Signature Bookshelf speakers and a pair of Octave Signature Subwoofers.
An external amplifier, the Morel Signature AMP 250, is also available making the subwoofer adjustment much easier.
◆
OCTAVE Signature BOOKSHELF Specifications
◆
OCTAVE Signature SUBWOOFER Specifications
◆
Signature AMP 250 Specifications
| SPECIFICATIONS |
OCTAVE Signature BOOKSHELF |
| Type |
2-way freestanding loudspeaker |
| Construction |
MDF polymer, coated cabinet with separate chamber for each drive unit. |
| Acoustical Loading |
Double port bass reflex |
| Drive Units |
Woofer: 5¼"(130mm) rear-vented system. Double ferrite magnet motor. One piece integrated dome and surround cone, made of damped polymer composite. 3" (75mm ) aluminum Hexatech™ voice coil and Morel's external voice coil (EVC) technology.
Tweeter: Mid/high frequency unit, low resonance soft dome, Acuflex™ coated, vented double magnet neodymium motor. 1⅛" (28mm) Aluminum Hexatech™ voice coil and Morel's EVC technology.
All units are shielded with low magnetic stray field |
| Frequency Response |
20-22,000Hz (40-18,000Hz ± 1.5 dB) |
| Nominal Impedance |
4 ohm |
| Nominal Power Handling |
120W RMS |
| Peak Power Handling |
1,000W 10m/sec |
| Sensitivity 1 W/1 M |
86 dB |
| Crossover |
2200 Hz / 12 dB octave |
| Dispersion |
Within 1.5 dB - 18,000 Hz
Horizontal: over 60°
Vertical: over 20° |
| Dimension (WxHxD) |
7" x 12½" x 12¾" (175mm x 315mm x 325 mm) |
| Weight |
15.4 lbs (7 kgs) each Octave unit |
| Finish |
Black, white and red piano finish |
| SPECIFICATIONS |
OCTAVE Signature SUBWOOFER |
| Construction |
Isobaric and port-loading reflex cabinet |
| Drive Units |
Two 9" (222mm) flat-profile woofers with 3" (75 mm) Hexatech™ aluminum coil and rear-vented Hybrid (neodymium and ferrite) double magnet motor |
| Nominal Impedance for a full floor-standing system |
4 ohm |
| Nominal Impedance for bi-amp configuration system |
2 ohm
|
| Nominal Impedance |
4 ohm |
| Power Handling |
250 W RMS |
| Peak Power Handling |
1000W 10m/sec |
| Frequency Response |
20-100Hz |
| Crossover |
200 Hz / 18 dB octave |
| Dimensions (W x H x D) |
7" x 27" x 12¾" (17.5 x 70 x 32.5 cm) |
| Weight |
37.4 lbs (17 Kg) |
| Finish |
Black White and Red piano finishes |
| SPECIFICATIONS |
Signature AMP 250 |
| Output Power |
250 WRMS @ 4 ohms |
| Output Impedance |
4 -8 ohms |
| Amplification Modes |
Full range / Filtered subwoofer |
| Variable Controls |
Level / Phase / Crossover |
| Crossover |
40 - 160Hz variable |
| Bass Control |
At 27Hz -3dB ~ +6dB (3dB steps) |
| Output Terminal |
5-way binding post outputs |
| Operation Control |
Auto on/off, constant mode or 12V trigger input |
| Voltage |
115-230 VAC 50/60 Hz |
| Dimensions (W x H x D) |
17" x 1⅞" x 11½" (436mm x 47mm x 290mm)
Or
19” x 1⅞" x 11½" (482mm x 47mm x 290mm) w / rack mount adapters |
| Mounting Options |
Free standing / U1 rack |
| Weight |
8.4 lbs / 3.8 Kg |
| Finish |
Black |
